💀HaleHound 4 in DIY Fire Weasel kit
💀HaleHound 4 in DIY Fire Weasel kit
Want it built for you?
Ship your kit straight to an Authorized HaleHound™ assembly partner. Pick the builder nearest you.
Assembly typically $60–$100, set and collected by the builder. You pay them directly — HaleHound earns nothing on assembly and doesn't handle it.
How the Build Service works
Who builds it? A trusted HaleHound partner — Zeek Sec Labs. Or leave it on “Ship to me” and build it yourself.
What does assembly cost? Typically $60–$100, set and collected by the builder. You pay them directly — HaleHound doesn't collect or handle the assembly fee.
How does payment work? At checkout you only pay HaleHound for the kit and shipping. After your order, your builder reaches out to arrange the build and their fee.
What happens after I order? We ship your kit straight to your builder, who builds and tests it, then gets the finished unit to you.
Who covers what? HaleHound warranties the kit and parts; your builder warranties their assembly work.
Rather build it yourself? Leave it on “Ship to me” — your kit ships to you with the build guide.
HaleHound 4IN " Designed by Midwest Gadgets, Inspired by BkBroiler, Relinquished to the HaleHound " this masterful vision was thought up by the community's very own BkBroiler and in conjunction with Hamspice the Fire Weasel was created! This clever little monster brings accessibility to even more folks than before!! This build on average with experience takes around 45 minutes. THIS DOES NOT SHIP WITH A BATTERY OF ANY KIND ! THE BATTERY TO USE IN THIS CASE IS A 5000 MAH 3.7V 1S LiPo. The battery leads get SOLDERED to the BAT+ / BAT− pads above the blue module — the connector on the cell does NOT plug into this board.
https://www.amazon.com/dp/B0F1F9MQK2?ref=ppx_yo2ov_dt_b_fed_asin_title
https://batteryint.com/products/3-7v-5000mah-105080-lipo-battery-rechargeable-1s-3c-with-pcb-ph2-0-plug-for-arduino-esp32-board-rpi
The kit includes
- HaleHound 3D printed case
- Fire Weasel Board
- Fire weasel leash
- 4" E32R40T exposed SPI CYD
- E07 - CC1101 SubGHz radio
- E01 - NRF24 2.4 GHz radio
- Generic wiring harness with 4 pin to deliver via UART
- ATGM336H with ceramic antenna
- Boost converter module (voltage step-up)
- 3.3V buck converter (voltage step-down)
-
M3 x 10 case hardware
THIS IS A DIY KIT — YOU BUILD IT
You will be soldering and assembling. With experience the build runs about 45 minutes. If you want one that arrives already wired and mounted, buy the 4in HaleHound COMPLETE BUILD instead.
WHAT YOU DO:
- BUILD IT. Assemble and solder the kit per the build guide.
- SOLDER THE BATTERY. No battery of any kind ships with this kit. Solder the battery leads to the BAT+ / BAT− pads above the blue module on the Fire Weasel board.
- FLASH THE FIRMWARE. Go to FLASH.HALEHOUND.COM when your build is finished. Browser-based, about two minutes, nothing to install.
- ADD YOUR OWN ANTENNAS. None are included — everyone has a favorite.
NOT INCLUDED: battery, antennas, PN-532 NFC/RFID module, firmware, solder, or tools.
✍️ Signature required on delivery.
I’m a one-person shop, and I’ve been hit hard by fraudulent chargebacks — people who receive their order, then dispute the charge to take it for free. As a small business I can’t afford to eat those losses, so I don’t have a choice: every order over $100 ships signature-required, with tracking and delivery confirmation. Someone just needs to be home to sign. Honest customers are never the problem — thank you for supporting a small builder.
This is a security research tool sold for authorized penetration testing, security research, education, and lawful RF experimentation. Use it only on networks, devices, and systems you own or have explicit written permission to test.
By purchasing, you agree that:
- You assume all responsibility for how the device is used. Any illegal, unauthorized, or malicious use is solely your responsibility.
- You will comply with all applicable local, state, federal, and international laws, including FCC regulations, the Computer Fraud and Abuse Act (CFAA), wiretap and electronic-communications laws, and all radio-transmission and export laws in your jurisdiction.
- The seller assumes no liability for any damages, fines, legal consequences, injury, or loss arising from use or misuse, and you agree to indemnify and hold the seller harmless.
- The device is sold AS-IS with no warranty, express or implied.
- You are 18 years of age or older.
Transmitting on some frequencies or at some power levels may be restricted where you live; you are responsible for operating within the law. Full terms: Terms of Service.